+40751584543
MON - SAT: 08 am - 17 pm
[email protected]
Compare
Wishlist
0 items / $0.00

Worldwide

Shipping

Phone Support

+40751584543
0 items / $0.00
Menu
5V 40A Power Supply for megacell charger PRO
5V 40A PSU For MCC Regular Original price was: $48.60.Current price is: $43.20.piece
Lithium-ion Cell Testing Device Megacell Charger PRO Hobby $245.16 – $331.56piece

Lithium-ion Cell Testing Device Megacell Charger PRO Commercial

$777.60piece

This device is perfect for small to large scale application for capacity testing and cycle testing on lithium cells with a charging voltage between 3.5V to 4.4V, supporting a wide range of cells, 18650, 21700, 26650, 32600, 32900, and any 34mm to 90mm round cells with a diameter smaller than 35mm.

8 in stock (can be backordered)

Add to wishlist
Compare
SKU: MCCPRO-COMMERCIAL Categories: ,
Share:
About

Megacell Charger PRO Commercial

This hardware contains the second generation of control board developed for improved control over charging and discharging process with extended charging and discharging power. The new hardware allows per slot setting and the use of external temperature sensor for improved safety.

CPU

ESP8266
slots_gray2

Number of Slots

16

Power Input

110 - 220V AC

Connectivity

WiFi and USB

Firmware

Latest OS Updates

Active Cooling

High Performance
Wide variety of options

Which Megacell Charger is right for
you?

Get a quick take on the differences.
Read More
Weight 7.5 kg
Dimensions 48 × 32 × 8.2 cm
Brand

Mount

Server Rack
Load resistance per slot

1.02 Ohms
Discharge Current Range Per Slot

0.1 – 2A
Display

Oled 0.96"
Case Material

Painted Metal
Discharge Modes

Constant Current (CC), Constant Resistance (CR), Constant Voltage (CV)
Discharge Range

4.4V – 1V
Charging Voltage Range

3.5V – 4.4V
Charge Current Range Per Slot

0.128A – 4.5A
Current Fall Time

<300 ms in CR, <15s CC and CV
Current Rise Time

<300 ms
Current Accuracy

±1%
Voltage Accuracy

±1%
Cell Protection

Over Current Protection (OCP), Over Temperature Protection (OTP), Over Voltage Protection (OVP), Reverse Polarity Protection (RPP)
Supported Cells For Onboard Slots

18650, 21700, 26650, 32600, 32900, 34mm to 90mm round cells with a diameter smaller than 35mm
Slot Grouping

Yes
Power Input

110V to 240V AC
Power Input Protection

Reverse Polarity Protection (RPP) at DC input side
Connectivity

USB, WiFi
Active Cooling

4 x 5V 12 CFM Fans
User Input

2 x push buttons for menu operation and commands
Accessory Connectivity

XS12, 6 Pin
CPU

ESP8266
Number of slots

16

Reviews

There are no reviews yet.

Be the first to review “Lithium-ion Cell Testing Device Megacell Charger PRO Commercial”

Megacell Charger PRO Documentation

Thank you for your interest in learnign how to use the Megacell Charger!

On this page you will find video tutorials and PDF download Documentation. To control one or multiple devices from a Dashboard, watch video 4 that goes through the installation process of our open source Mega CNC software.

Python library that can send commands and gether data from MCC PRO is also available. Scroll to download section for more info.

Raspberry Pi Pre-Configured or RPI Image

If you purchased our raspberry pi pre-configured or you burned the raspberry pi image we provide, here’s some tips on how to use it.

  1. The megacnc.service starts automatically when raspberry pi boots up
  2. To get the ip of your device, you must connect the device with an ethernet cable to your local network and connect to your router and loog for a host called rpimcc
  3. Using that ip, you can access the Mega CNC application on your browser by typing http://192.168.x.x:8000 . Make sure to replace the ip with the correct one and keep the :8000 at the end

     

  4. To connect via ssh with putty, you type in the ip of your device and use mccadmin as user and MCCIsTheBest! for password
  5. To perform an update, login with ssh and run the following command: sudo mccservice_update 
Easiest way to get started is with:

Video Documentation Section

There's nothing simpler than watching a video

Video 1 - Standalone use

Video 2 - Connecting Megacell Charger to your wifi network

Video 3 - Firmware update (Only if your firmware is different version, shows when MCC starts)

Video 4 - Setting up the Mega CNC application

Video 5 - Updating Mega CNC using the custom image

Download Section

There's nothing more important than getting easy access to your files

Related products

Open sidebar
Shopping cart
Close
Sign in
Close

Continue with Facebook
Continue with Google

No account yet?

Create an Account